I have on my desk a pile of plastic 3D-printed marine animal parts that I've kept for years. I've used it as a reminder of that technology can and often does behave in unexpected ways. So running a Digital Learning youth program involves a certain amount of risk and uncertainty. So plan accordingly.
I realize that I've been kind of embarrassed to tell the story of where these 3D-printed parts came from. So as I approach a milestone in my career, it seems like a good time to face that fear.
In the Spring of 2013, I organized with my co-educator Christine the "Fastest Fish 3D Modeling Spring Break Program" at my museum. It was essentially a camp for a dozen middle school youth that we ran together.
The Cal Academy had recently opened a new exhibit called "Built for Speed," focused on fastest animals in the sea. To highlight the themes of the exhibit, we decided to have our young campers learn about marine animal biology. It made a lot of sense as a topic area: our facility has a world-class aquarium, scientists who specialize in marine animals, and tens of thousands of marine specimens behind-the-scenes.
Being a Digital Learning camp, we wanted to bring in a technology that made sense for our topic and our audience. In 2013, 3D printing was still a fairly new technology. Few institutions had them and there were only a handful of consumer-ready models.
So this was our brilliant idea: What if we had a group of middle schoolers using 3D printing technology to "discover" their own unique marine animals based on what they had learned during the camp about marine animal physiology and their ecosystems? During the camp, the kids would using software to design a 3D animal, which would then be printed out for them before the end of the camp.
Fortunately, I had a contact at a local company that was trying to market their 3D printer. They were excited to have kids learn about and use their printer. They offered to lend us one for the week, and help us to print out 3D objects for the program.
On the software side, we had found some fairly easy-to-use freeware that our campers could use to design 3D objects.
In retrospect, I should have been a little worried about how integrating 3D printing into a Spring Break camp would go. It was the first time we had ever used 3D printing in a youth settings, we had no experience working with this company or their tools, and we only had six days to get it done with a bunch of middle schoolers.
But we decided to go for it and hope it worked out.
Preparations
We weren't totally crazy. We decided that given how long it takes to print 3D models, that we would create a bunch of them ahead of time to let our campers use during the camp.
We decided to provide a bunch of reference images for our 3D printer partner and have them create a set of marine animal parts for our camp. Here's how they turned out.
As you can see, we had a lot of fins, tails, and a set of tentacles. They even had some neat connectors to help attach them to other parts. So far, so good.
Now we had to design the actual camp experience. Looking back, I'm pretty proud of how awesome this camp schedule was.
Day 1
- Intro to the Cal Academy: tour of collections, aquarium, research facilities
- Intro to marine science, biology
- Intro to design / discovery challenge
- Science activity: ethograms
Day 2
- Tour of Ichthyology Collections
- Deeper science learning about focal animals and evolution and adaptation
- Basic anatomy dissection activity
- Youth teams decide on animal basic attributes, habitat, adaptations
Day 3
- Meet Bart, director of the Steinhart Aquarium!
- Science Learning: animal adaptations for speed and other focal adaptations
- Design / Tech learning: science illustration with Sean
- Teams decide on basic attributes of creature
- Teams create first prototype illustration
- First animal design review
Day 4
- Science Learning: ocean conservation
- Design / Tech Learning: Intro to 3d printing
- Teams create model using clay and pre-printed parts
- Group presentations of animals
Day 5
- Teams design custom part of model on computers for 3D printing
- Design review by science experts
- Teams finalize design and create slideshows for presentations
Day 6
- Assemble final model with custom part, scan model for printing
- Evaluate program individually and as a group
- Practice presenting
- Presentations for families and visitors to the Cal Academy
There are a few things I notice, looking back on the camp. We packed in a lot of activities into six days, probably too many. Middle schoolers have definite cognitive load constraints, and need lots of time for running around, being goofy, or just being on their own. If I were to do this camp today, I would have more breaks and fun time.
On the positive side, we had a lot of neat elements that made this camp unique:
- They got to go behind the scenes of an actual science facility, including it's collections and aquarium.
- They got to meet actual scientists who study marine animals.
- They experienced a truncated design process, going from ideation to prototyping to testing and final product in just a few days.
- They created their models using a variety of tools, from simple illustrations, to clay modeling, to digital 3D modeling.
- They had a lot of opportunities to share their learning with each other and others.
Pretty cool, right?
The Camp Begins
Days 1-4 went quite well, from my recollection. There were some kids who were a little crazier than others. Other kids who were super shy. Two boys who couldn't be in the same group together because they made each other crazy. You know, the usual.
Kids got pretty excited about creating their own marine animals, based on their understanding of biology and what they had experienced during the camp.
Here's an illustration of the "Blue Sail Shark" that one team created.
And here's the clay model they created, with attached 3D printed parts.
Stuff Goes Sideways
And then, things stopped working.
Our original plan was for the kids to create 3D designs for custom animal parts on the morning of Day 5. These would be shared with our 3D printer people, who would speedily print out the models from their offices, and deliver them to the youth on the morning of Day 6.
Our contact at the 3D printing company told us on Day 3 that he was worried that we had not given their designer enough time to get the 3D models, adjust them to work with their printer, and print them out in time for the youth on Day 6.
So we moved up the schedule to have the youth actually created their 3D models on Day 4, which gave the company a day and a half to print out the models. The kids created what seemed to me to be fairly simple models of animal parts -- a head, a couple of fins, a tail.
This turned out to be an optimistic estimate, for reasons that are unknown to me. Maybe the designer got sick. Maybe the printer was sick. All I know is that they said they couldn't make the 3D parts that our kids had designed in time for the end of the camp.
All I know is that on the final day of camp, I had no custom 3D animal parts that were integral to our campers designs.
The Show Goes On
So the final day of the camp had arrived. A presentation by the campers to their families and the visiting public was scheduled for that afternoon. And a critical part of their marine animals they had designed would not be ready for them. DISASTER!
We didn't have a lot of options, so decided to just run with it. This is what we told our campers:
"Good morning campers! As you know, today your families are coming to the Academy to see your presentation of your amazing marine animals that you discovered during this expedition.
"The good news is that your teams have created some fantastic marine animals for you to present. You've all learned so much and done so much in the little time we've had together. You should all be proud of your work.
"The bad news is that the 3D printed parts that you all designed are not ready yet. So we should plan on presenting without them. But we're confident that you are going to do a great job anyway."
We were expecting them to freak out, run screaming from the room, burst into tears. Instead they just sort of collectively shrugged and started working on their presentations.
I realized that I was freaking out more about the missing 3D parts than the kids were. For them, it was something they had never seen and didn't have any great expectation about receiving. And in their mind, their creations were already there in front of them. The custom part was just icing on the fish.
So they all did a bang up job on their presentations. Their 3D parts did arrive at the 11th hour, but it hardly made a difference. They got a chance to share their learning and their creations with their peers and their families. That was what mattered.
